Lubrication of NSK bearings

Writer: Eric Bearing Limited

1. NSK bearing of oil bath smooth
Oil bath smooth NSK bearing is the most common way of smooth, suitable for low, medium speed bearing smooth. NSK bearing a partial will dip in the slot, smooth by the oil with a rotating bearing parts, and then come back to the oil tank face should be slightly lower than the minimum in the middle of the roller.
2. NSK bearing drops of oil slick
Drops of oil is suitable for quantitative supply to smooth smooth NSK bearing oil components, dripping oil every 3 to 8 seconds individual a advisable, too much oil amount will cause bearing temperature increased.
3. NSK bearings the circulation of the oil slick
Be filtered with oil pump oil NSK bearings components to walk, through the bearing the smooth again after oil filter cooling after use. Circulation oil can take away because certain quantity of heat, make bearing cooling, reason this law in high speed of practical bearing parts.
4. NSK bearing spray smooth
With a boring contraction air after spray oil mixed with smooth caused by oil mist, radiation NSK bearing, the air can effectively make bearing cooling and can avoid impurities invasion. This method is suitable for high speed, low temperature bearing parts of smooth.
5. NSK bearing radiation smooth
With low pressure oil pump will through the nozzle NSK bearings to shoot, the bearing the oil in the bearing into the other end into the oil. In bearing high speed rotating, rolling body and maintain a high proportion of in rotation speed air around that caused by air, with individual smooth ways hardly will smooth oil to bearing, then must use the low voltage radiation way will smooth oil spray to bearing, nozzle should be put in the position of the inner circle and maintain a central between.